Home > Products
180W High-Power Lead-acid Lithium Battery
Overview and Use
This series of charger is used for lithium batteries such as lithium iron phosphate (LiFePO4) battery and lithium manganese oxide (LiMn2O4) battery. The charger is small and light and guarantees an efficient, safe, reliable, and stable charging process. Automatic switchover between is possible. The charger is also protected against damage caused by reverse polarities, output short circuits, and output overloads.
This series is widely used for the circular charging of electric forklifts, stackers, golf trolleys, electric tour buses, electric patrol cars, electric floor cleaning machines, electric motorcycles, ATVs, electric yachts, electric cleaners, electric sweeping cars, UPSs, solar power generators, wind power generators, and electric communications in railway systems.

Lead-acid Battery / Lithium Battery Models

No.

Spec.
and Model

Constant Charging Voltage
(Voltage Limit)

Charging
Current

Switching /
Turn-off Current

Weight (KG)

Size L×W×H
(MM)

Lead-acid
Battery

LiMn2O4
Battery

LiFePO4
Battery

(Current
Limit) A

Lead-acid
Battery
(A)

Lithium
Battery
(A)

1

SPK900-12

14.7V

16.8V

14.6V

8.0 1.6 0.8

0.9

150×90×50

2

SPK900-24

29.4V

29.4V

29.2V

5.0 1.0 0.5

3

SPK900-36

44.1V

42.0V

43.8V

4.0 0.8 0.4

4

SPK900-48

58.8V

54.6V

58.4V

3.0 0.6 0.3

Char
acte
ris
tics

1

Automatic, bulk charge, absorption, trickle charge, automatic turn-off

2

High-accuracy current / voltage lockout, full charge, no overcharging

3

Safe and reliable protection against overcurrent, overvoltage and short-circuits.
Stable and reliable military-grade integrated circuits
are used in the controller chips of the switch’s power supply.

4

Conversion efficiency = 90~98%, power factor ≥ 98%; environmentally friendly;
the mechanical shock resistance and anti-seismic levels meet the
requirements of SAEJ1378

5

Equipped with a digital display, an indicator light display, and aluminum shell;
the charger is attractive, strong and durable.

6

The products meet the requirements of European CE, RoHS and REACH.

7

Patented technology; three-year warranty

Remarks

We set the turn-off current of our lithium batteries to 5% of the constant-current
charging current. This can be changed to 3~10% based on customer needs and
battery characteristics.


Note: The model of a lithium battery charger is identified according to the battery pack’s highest actual voltage.

Technical Data

Rated Input Voltage: AC85V~AC265V
Rated Frequency: 45~65Hz
Power Factor: ≥0.98
Full-load Power: ≥93%
Mechanical Shock Resistance and Anti-seismic Levels Meet the requirements of SAEJ1378.
Protection Grade: IP46
Operating Temperature: -40~+55
Storage Temperature: -40~+100
Charging Control: Controlled via CAN bus or enablement line (optional).

Protection Characteristics

·Overtemperature Protection: When the charger’s internal temperature exceeds 75, the charging current decreases automatically. When the internal temperature exceeds 85, the charger turns off and resumes charging when the temperature lowers.

·Short-circuit Protection: When the charger’s output short-circuits, the charger automatically stops. It resumes charging 10 seconds after the problem is solved.

·Reverse Polarity Protection: If the battery’s polarity is reversed, the charger cuts the connection with the internal circuit. The battery stops charging to avoid causing damage.

·Input Undervoltage / Overvoltage Protection: When the AC input voltage is less than 85V or higher than 265V, the charger turns off. It resumes charging when the voltage returns to normal.

Working Environment

No.

Item

Technical Data

Unit

1

Operating Temperature

-40 ~ +50

2

Storage Temperature

-40~ +90

3

Relative Humidity

5% ~ 95%

/

4

Cooling Method

Natural Air Cooling

/

5

Altitude

3000

m

Installation Instructions

·Install the charger in an upright position and keep the radiator vertical. Refer to the installation diagram for details. Leave more than 10cm around the radiator to ensure ventilation during charging. Do not place the radiator facing down or the charger’s internal temperature will become excessively high and charging will be affected.

·Ensure that vents are not blocked to prevent overtemperature. Do not place the charger near a heat source. Leave enough space around the charger to guarantee ventilation and facilitate the use of connectors.

·Ensure the AC power supply voltage and current match the allowable input voltage and current of the charger. If you have any questions, please contact the supplier or consult the local power supply company.

·In consideration of safety and electromagnetic compatibility, the charger comes with a three-pin plug, which can be used in sockets with earthing wires.

·If an extended wire is used to supply AC power, ensure the extended wire can withstand the charger’s maximum input current and the length of this wire is within the limit.

·Keep the voltage drop of the charger-battery connecting wire under the maximum current less than 1% of the battery voltage. Otherwise, charging may be affected. The lead diameter should meet the requirements of the output current.

·When compensating voltage for the battery, place the temperature sensor at the point of the battery with the highest temperature; for example, the central area between two batteries.

·If the battery does not work normally or is damaged, disconnect the power supply and the charger’s connector immediately and contact the supplier.

·Do not disassemble the charger yourself. Removing the hood may result in an electric shock or injury.

·To prevent damage to the charging wire, please do not place an object on the wire or place it in a location where it might be stepped on. Replace the wire immediately if it is worn or damaged.

© 2006-2011 SPK All rights reserved. Spowerking (SPK) Technology Co., Ltd. Tel: +86-755-8384 9495 Fax:+86-755-8384 9377
Email: spk@spowerking.com ICP06023382 Design by Gessy
Charger, Battery Pack Charger, Adapters, Power Supply, Mobile Charger, Power Bank, LCD Charger, Fast Charger, Lead-acid Battery, Lithium Battery Charger, Lithium-Polymer battery, Electric Car battery, Power battery, LiFePO4 battery, High Drain Li-Polymer battery, High-energy lithium power battery and High Drain LiFePO4 battery